中文简体
English
Material & Specification Overview
The table below summarizes profile choices that best support a rustic wood-look wall. Exact dimensions depend on the specific profile, so please confirm against the datasheet before finalizing a wall layout.
| Item | Detail |
| Recommended Structure | Natural wood grain composite, or capped composite with a grain emboss, hollow or solid core |
| Standard Panel Width | 120mm - 190mm; mixed widths available for a more organic pattern |
| Standard Thickness Range | 12mm - 22mm for wall use |
| Standard Length | 2900mm / 3600mm / 4000mm |
| Surface Finish | Deep wood-grain emboss, streaked multi-tone coloring, lightly weathered look |
| Profile Options | Shiplap, tongue-and-groove, and board-and-batten style profiles |
| Typical Color Family | Warm brown, honey, driftwood grey, weathered barn tones |
Product Photography
We provide real installed wall photos of cabins, restaurants, and farmhouse-style projects, plus macro close-ups of the grain and the way the streaked color reads at close range and from a distance. We also show shiplap and board-and-batten layouts side by side so you can choose the pattern that suits your building.
A note on variation: rustic finishes are meant to show natural variation, so no two boards are identical. Ordering a sample set from several boards, rather than a single piece, gives you a more honest picture of the range you will see across a full wall.
We can also share a simple layout sketch comparing shiplap, tongue-and-groove, and board-and-batten on the same wall, so that a client can see how the shadow lines and joints change the overall character before choosing a profile.
Minimum Order Quantity & Pricing Structure
Pricing follows the underlying wood grain or capped composite profile, with a modest premium for deeper embossing and multi-tone coloring. MOQ for a first trial order is typically 1 x 20ft container. Wall cladding orders are quoted by coverage area, so we ask for your wall dimensions or your architect's takeoff to give an accurate figure instead of a rough guess.
| Order Volume | Pricing Tier |
| Sample boards | Sample fee + courier, often credited toward the first order |
| 1 x 20ft container | Standard FOB pricing |
| 1 x 40ft HQ container | Discounted per-sqm pricing |
| Lodge, resort, or multi-building volumes | Negotiated pricing with phased delivery across construction stages |
Quotations are typically given as FOB Ningbo or Shanghai, with CIF and DDP available once the destination and Incoterm are confirmed. Standard payment terms are 30% deposit by T/T with the balance against the B/L copy. Because rustic layouts often use mixed widths, we can quote each width separately so that your estimate reflects the true mix of boards on the wall.
If you are comparing against real timber, we recommend including long-term costs such as re-staining, treatment, and replacement in your comparison, since composite usually shows its advantage over the life of the building rather than on the initial price alone.
For projects that combine an exterior wall with interior accent walls, we can quote both together so the color family and profile stay consistent, and we can suggest which parts of the building justify a premium finish and which can use a simpler profile.
OEM & Customization Options
Rustic projects usually start from a photo or a physical timber sample the client likes, so customization is about getting close to that reference in color, grain depth, and board layout.
- Color and streaking - match a reference sample, with control over how strong the multi-tone streaking should look
- Grain depth - choose a deeper or softer emboss depending on how pronounced you want the timber character
- Profile style - shiplap, tongue-and-groove, or board-and-batten profiles to suit the architecture
- Mixed-width kits - packs of several widths in a set ratio for a natural, irregular wall pattern
- Trim and corners - matching corner boards, window and door surrounds, and base trim for a complete system
For lodge and cabin builders, we can also discuss an interior-and-exterior matched set, where the same color family is supplied for the outer wall and for feature walls inside, so the building feels coherent from outside to inside. Small physical mock-up panels can be sent ahead of the main order so your client can approve the look in person before production starts.
For restaurants, wineries, and cafes that want a signature wall, we can develop a distinctive board width mix or a custom streaked color, subject to a reasonable minimum order for the new tooling or color work. We can also supply offcut samples so your carpenter can test cutting, edge finishing, and fixing before working on the main wall.
If your design needs unusually long boards for a tall gable wall, let us know the required length early, since we can discuss custom lengths that reduce visible joints, subject to what can be handled safely in shipping and on site.
Certification & Quality Control
Rustic cladding is often used on buildings in rural or fire-sensitive settings, so buyers frequently ask about fire performance and long-term weathering in addition to standard compliance documents.
| Certification / Test | Availability |
| Fire-retardancy test reports | Available for selected profiles; classification depends on local code |
| UV/weathering and water absorption reports | Available (SGS/BV/Intertek) |
| REACH / RoHS compliance | Standard formulation compliant |
| Factory quality system | ISO 9001 factory management system |
Our QC process for this line checks that the grain depth and streaking fall within an approved range, so that boards look naturally varied without any looking like an obvious outlier. We also measure board width and straightness, since crooked boards make shiplap and tongue-and-groove joints harder to close neatly on a long wall.
If your building is in an area with rules about combustible exterior materials, please share the local requirement early. We will confirm which test data already exists and tell you plainly if a fresh test would be needed for your jurisdiction.
Long-term appearance also matters, so we can share weathering test data and examples of installed walls that have been in service for some time. Boards should be stored flat and supported, and kept out of prolonged direct sun while still wrapped, which helps them arrive on the wall straight and evenly colored. Batch records let us trace any installed board back to its production run if a question ever arises.
If your project must meet a specific fire or combustibility rule, please send the exact clause or test standard so that we can compare it with the data we already hold and confirm whether it is covered or needs a new test.
Production Capacity & Lead Time
Rustic cladding runs on our wood grain and capped composite lines, with lead time depending on whether an existing color is used or a new streaked color needs to be developed.
| Item | Detail |
| Monthly capacity | Follows the capacity of the selected grain and core material line |
| Sample lead time | 5-8 working days for existing colors and profiles |
| Standard order lead time | 20-30 days after deposit and specification confirmation |
| Custom color or profile lead time | Additional 25-35 days for a new streaked color or new tooling |
| Mixed-width note | Orders combining several widths may need extra planning so that all widths are ready to ship together |
We provide production progress updates and can share photos of finished boards laid together, so you can see the natural range across a batch before it ships. Rustic projects are often built in remote locations, so we recommend confirming your delivery window early and allowing extra time for inland transport at your end.
If your project has a seasonal building window, for example a lodge that must be finished before winter, please tell us the deadline when you request a quotation so that we can plan production and shipping backwards from it.
Because rustic buildings often have long, irregular delivery routes, please confirm the final delivery address type early, whether it is a port warehouse, a building site, or a remote plot, so we can advise on pallet size and weight. This avoids surprises when a container arrives at a location that cannot handle it.
Logistics & After-Sales Support
Rustic cabins and lodges are frequently built in places that are hard to reach, so we try to make delivery planning as clear as possible from the start.
- Shipping ports - orders typically go out via Ningbo or Shanghai port; FOB, CIF, or DDP quoting available
- Mixed-width packing - different widths are bundled and labeled clearly, so your crew can find the right boards quickly on site
- Transit packaging - strapped pallets with corner protectors and interleaving to protect the embossed surface
- Documentation - commercial invoice, packing list, bill of lading, and certificate of origin provided as standard; fire and weathering test reports and inspection certificates on request
- Damage/shortage claims - please photograph any damage at unloading; verified defects are resolved through replacement stock or credit on the next order
- Installation guidance - manuals for shiplap and tongue-and-groove fixing, expansion gaps, and corner detailing
For remote sites, we recommend ordering a modest extra allowance of boards, since a shortage discovered mid-installation can mean a long wait for a top-up shipment. We are happy to help you estimate a sensible allowance based on your wall layout.
Some rustic sites have no forklift and limited unloading help, so please tell us in advance and we can advise on smaller bundle sizes that can be handled manually. After installation, we can supply a short care guide for cleaning and general maintenance, so that owners keep the wall looking good with minimal effort over the years.
We can also number pallets by wall section if you tell us the building layout, so that your crew can lay out boards on site in the same order they were packed, which saves time and reduces mistakes on a large, irregular elevation.
Frequently Asked Questions
Q: Will boards look too uniform for a truly rustic wall?
A: We use deeper grain embossing and streaked multi-tone coloring so that boards look naturally varied, and mixed-width kits can add to the irregular look. Ordering a sample set of several boards helps you judge the natural range.
Q: Is this suitable for interior feature walls as well as exterior cladding?
A: Yes, many buyers use the same color family outside and on interior accent walls in restaurants, cafes, and lodges. We can supply a matched set for both.
Q: How does it compare with real timber for fire safety?
A: Fire-retardancy test data is available for selected profiles, and we can share it. Requirements vary by local code, so please tell us your rules and we will confirm which documentation applies.
Q: Which profile is easiest to install?
A: Tongue-and-groove and shiplap profiles are both straightforward for an experienced crew, and we can provide installation guidance and a short video call for teams new to composite cladding.
Q: Can you match a photo of a wall we like?
A: Often yes. Send us a photo or a physical timber sample and we will identify the closest existing color and grain in our range, or discuss developing a custom color match.
Q: Does the rustic look fade or change over time?
A: Composite colors may soften slightly during the first months outdoors, then stabilize. This gentle mellowing usually suits a rustic look, and capped options are available for stronger color stability.
