中文简体
English
Material & Specification Overview
The table below summarizes typical anti-slip options. Exact slip ratings depend on the profile and the test method used, so please confirm against the relevant test report rather than relying on general descriptions.
| Item | Detail |
| Deep Groove Profiles | Wide, deep grooves that channel water and provide edge grip; suited to steps, ramps, and wet zones |
| Fine Groove Profiles | Narrow, closely spaced grooves for general walkways with a more refined look |
| Textured Capped Profiles | Capped surfaces with fine embossing or grit-like texture for additional micro-grip |
| Stair Solutions | Nosing profiles with anti-slip inserts or textured edges for step safety |
| Standard Thickness Range | 20mm - 30mm |
| Standard Width Range | 135mm - 200mm |
| Test Documentation | Wet slip resistance reports available per profile, using recognized pendulum or ramp methods |
Product Photography
We provide close-up photos of each groove and texture pattern, shots of boards when wet, and installed images of steps, ramps, and pool edges, so that buyers can see exactly how each surface looks and how water behaves on it.
A note on ratings: slip ratings depend on the test method, the surface condition, and the footwear or bare-foot condition used in testing. We recommend comparing reports made with the same method, and we can explain the differences between methods.
We can also share a comparison sheet that lists our anti-slip profiles by groove depth, texture type, and suitable use, so that a specifier can choose quickly and check the matching test report for the chosen profile.
We can also provide the groove depth and spacing figures for each profile, so that a specifier or auditor can check them against the test report and confirm the profile supplied is the one that was tested.
Minimum Order Quantity & Pricing Structure
Pricing follows the underlying profile, with capped and textured surfaces and stair accessories priced according to specification. MOQ for a first trial order is typically 1 x 20ft container, and we can combine several anti-slip profiles and matching stair accessories in one container for projects that need different grip levels in different zones.
| Order Volume | Pricing Tier |
| Sample boards and stair pieces | Sample fee + courier, often credited toward the first order |
| 1 x 20ft container | Standard FOB pricing |
| 1 x 40ft HQ container | Discounted per-sqm pricing |
| Public works and hospitality volumes | Negotiated pricing with phased delivery across sites |
Quotations are typically given as FOB Ningbo or Shanghai, with CIF and DDP available once the destination and Incoterm are confirmed. Standard payment terms are 30% deposit by T/T with the balance against the B/L copy. Public buyers can request a formal quotation with test report references in the format their procurement process requires.
A practical way to control cost is to use the highest-grip profile only where risk is highest, such as steps, ramps, and pool edges, and a more economical profile elsewhere, while keeping color consistent across the whole project.
We can also provide a zone-based quotation, listing high-grip profiles for steps and ramps separately from general walkway profiles, so that the total budget shows where the safety spending is concentrated and why.
For public buyers who need to compare several suppliers on equal terms, we can provide a quotation that lists profile, thickness, test report reference, and unit price on one page, so that the comparison is simple and transparent and does not depend on assumptions.
OEM & Customization Options
Anti-slip buyers usually customize for a specific performance level and zone, so we focus on matching the profile and accessories to the risk in each area.
- Groove depth and spacing - deeper or closer grooves for wetter, steeper, or shadier areas
- Surface texture - textured cap options for a more refined look with additional grip
- Stair nosing and inserts - anti-slip nosing in a contrasting or matching color, with visible edges to help users see steps
- Color coordination - matching colors across grooved, textured, and stair pieces so that safety features do not look out of place
- Documentation packages - test report bundles organized by profile for tender and audit use
For public facilities that need visible edge marking on steps and ramps, we can supply contrasting-color nosing options so that stair edges are easy to see. We can also help prepare a short zoning plan that suggests which profile suits each part of a site, based on wetness, slope, and expected foot traffic.
We can also produce small demonstration samples showing groove and texture options next to each other, which safety officers and designers often find useful for comparing grip by hand and by eye before a specification is finalized.
For sites with mixed users, such as families, older visitors, and wheelchair users, we can also discuss surface options that balance grip with ease of rolling and comfort underfoot, since a very aggressive texture can be harder to push a wheelchair over. We can send samples so that the surface can be tested by the people who will actually use the space.
Certification & Quality Control
Anti-slip products are chosen for safety, so documentation and consistency matter more than for most other flooring choices, and we treat test data with care.
| Certification / Test | Availability |
| Wet slip resistance reports | Available per profile (SGS/BV/Intertek), using recognized pendulum or ramp methods |
| Groove geometry checks | Groove depth and spacing verified during production |
| Water absorption reports | Available per profile |
| REACH / RoHS compliance | Standard formulation compliant |
| Factory quality system | ISO 9001 factory management system |
Our QC process checks groove depth, spacing, and texture consistency, because slip resistance depends directly on these details holding to specification. We compare samples from each batch against approved references. If your project specifies a local slip standard, please tell us which one, so that we can confirm whether existing reports cover it or whether a new test would be needed.
We are open about limits. A test result reflects the surface as tested, and real-world grip depends on cleaning and condition, so we provide maintenance guidance along with the reports.
Batch records let us trace a shipped order to its production run, which is useful if an audit or insurer later asks which profile was supplied and what test data applies to it. We keep this information for a reasonable period.
We also suggest requesting the test report for the exact profile and color you plan to use, since results can differ between profiles. Please check that the report states the method, the surface condition, and the date. If anything in a report is unclear, tell us and we will explain it plainly, and where a gap exists, we will say so instead of implying coverage that we do not have.
Production Capacity & Lead Time
Anti-slip profiles are produced on our grooved and capped composite lines, with lead time depending on the profile, and on whether stair accessories or custom grooves are included.
| Item | Detail |
| Monthly capacity | Follows our grooved and capped composite line capacity |
| Sample lead time | 3-8 working days for existing profiles |
| Standard order lead time | 18-30 days after deposit and specification confirmation |
| Custom groove or stair accessory lead time | Additional 25-35 days for new tooling |
| Testing note | If a new slip test is required for a specific standard, please allow additional time for sample preparation and laboratory scheduling |
We provide production progress updates and can share close-up photos of groove detail before shipment. Public projects often have compliance deadlines, so please share them when you request a quotation.
If a test report is a condition of approval for your project, please confirm this before ordering. We will tell you whether existing documents are enough, so that the schedule includes any extra step at the start.
If your project has an inspection date or a compliance deadline, please share it when you request a quotation. We will work back from that date and tell you the latest order date that allows for production, transit, and installation.
If a test is needed to satisfy a specific standard, we suggest starting it as early as possible, because sample preparation, shipping to the laboratory, and testing all take time. We will give you an honest estimate of the schedule and update you as the test progresses, so that your compliance date is not put at risk by a step that was left too late.
Logistics & After-Sales Support
Grooved and textured boards should arrive with their grip surfaces undamaged, so we pack them with care, and we support buyers with maintenance guidance after installation.
- Shipping ports - orders typically go out via Ningbo or Shanghai port; FOB, CIF, or DDP quoting available
- Packing - strapped pallets with corner protectors, and separate labeled cartons for stair nosing and accessories
- Documentation - commercial invoice, packing list, bill of lading, certificate of origin, and slip resistance test reports provided as standard
- Damage/shortage claims - please photograph any damage at unloading; verified defects are resolved through replacement stock or credit on the next order
- Installation and maintenance guidance - manuals covering drainage, groove direction, and a cleaning routine to keep grip levels up
We suggest laying grooved boards so that grooves run in the direction that drains water best, and we can advise on the correct direction for slopes and steps. For facilities, we can supply a short cleaning schedule, since regular removal of algae and film is the simplest way to keep a surface safe.
Our team stays reachable by phone or WhatsApp through shipping and unloading, and can help your installer choose groove direction and fixing details for steps and slopes during the first days on site.
Please tell us the site conditions when you place your order, such as pool splash, shade, slope, and expected cleaning routine, so that we can give installation and maintenance advice suited to the actual environment. If a board arrives with damaged grooves, send photos with the carton label, and we will arrange a replacement for verified cases, since a damaged groove can reduce grip locally.
Frequently Asked Questions
Q: Is any composite decking automatically anti-slip?
A: No. Grip depends on surface texture and grooves, and smooth or lightly textured boards can be slippery when wet. We recommend choosing a documented anti-slip profile for wet or high-risk areas.
Q: Which is better, deep grooves or a textured surface?
A: Deep grooves suit steps, ramps, and very wet areas. Textured capped surfaces suit walkways where a smoother look is preferred. Some projects use both in different zones.
Q: Can slip ratings decline over time?
A: Yes, if algae, oil, or dirt build up on the surface. Regular cleaning helps keep grip close to the tested level, and we provide guidance on cleaning routines.
Q: Can you supply test reports for a tender?
A: Yes, we can provide wet slip resistance reports per profile and organize them for tender or audit use. If a specific local standard is required, please tell us so we can confirm coverage.
Q: How can steps be made safer?
A: Use a grooved or textured profile with nosing that has anti-slip inserts, and consider contrasting edge colors so that steps are easy to see, particularly in low light.
Q: Are anti-slip boards comfortable for bare feet?
A: Fine groove and textured capped options are generally comfortable, while very deep grooves are more noticeable underfoot. We can send samples so that you can test them by hand and foot.
Q: Can grooved boards trap dirt?
A: Grooves can collect leaves and grit, so occasional sweeping or rinsing is recommended. Shallower grooves are easier to keep clean, deeper ones give more grip, and we can help you choose the balance.
