中文简体
English
Material & Specification Overview
The table below summarizes the profile choices that best support a modern minimalist look. Exact dimensions depend on the specific profile selected, so please confirm against the datasheet before finalizing a drawing or order.
| Item | Detail |
| Recommended Structure | Co-extrusion capped composite, solid or hollow core |
| Recommended Board Width | 150mm - 200mm for a broad, calm board face |
| Standard Thickness Range | 21mm - 25mm |
| Standard Length | 2900mm / 3600mm / custom lengths to reduce visible end joints |
| Edge Profile | Square edge for crisp shadow lines; slight micro-bevel available on request |
| Surface Finish | Matte capped, very fine brush, or smooth low-gloss; deep wood-grain emboss is generally avoided for this style |
| Fastening System | Hidden clip system recommended so no screw heads appear on the board face |
| Typical Color Family | Warm grey, graphite, sand, stone, soft off-white |
Product Photography
We supply real installed project photos showing wide-board minimalist decks beside glass and concrete, plus close-ups of the gap width, the edge detail, and the clip installation. We also provide photos under different lighting, because a neutral grey can look noticeably warmer or cooler depending on the time of day, and designers usually want to see that before choosing a color.
A note on end joints: long, uninterrupted board runs are a hallmark of this style. Ordering longer boards, or planning joist layouts so that joints fall in a deliberate pattern, does more for the finished look than any surface treatment, and we are glad to review a deck plan with you before production.
Minimum Order Quantity & Pricing Structure
Pricing for this style follows the price of the underlying capped composite profile, with a modest adjustment for wider boards, longer lengths, and any custom color. MOQ for a first trial order is typically 1 x 20ft container. Because designers often want to see a real board before specifying it across a project, we are also happy to send a small sample set ahead of any order commitment.
| Order Volume | Pricing Tier |
| Sample boards and color chips | Sample fee + courier, often credited toward the first order |
| 1 x 20ft container | Standard FOB pricing for the selected capped profile |
| 1 x 40ft HQ container | Discounted per-sqm pricing |
| Developer or hospitality group volumes | Negotiated pricing, with phased delivery matched to construction stages |
Quotations are typically given as FOB Ningbo or Shanghai, with CIF and DDP available once the destination and Incoterm are confirmed. Standard payment terms are 30% deposit by T/T with the balance against the B/L copy. Wider boards and custom lengths can change how many pieces fit in a container, so we confirm the realistic piece count at quotation stage instead of assuming a standard loading figure.
If your budget is tight, one practical option is to use the wide capped boards on the main visible deck area and a lower-cost profile in the same color on service areas or the hidden edges of the project, which keeps the overall appearance consistent while controlling total material cost.
For projects still in the design stage, we can issue a budgetary figure first and a firm quotation once the color, width, and quantity are final, which suits how many design and construction teams manage their approval process.
OEM & Customization Options
Minimalist projects are usually specified from a designer's drawing or mood board, so customization here is mostly about matching a precise color, board width, and edge detail rather than choosing from a general catalog.
- Color matching - match a designer's reference sample or a Pantone/RAL value, with particular care taken to keep the tone even across the whole board length
- Board width & length - non-standard widths and longer lengths can be produced to reduce visible joints on large terraces
- Edge and gap detail - square edge, micro-bevel, and different clip options to set the gap width to the designer's specification
- Matching trim - fascia boards, stair nosing, and edge trim in the same color and finish so that the deck edge and steps read as part of one surface
- Branding - private label packaging for distributors serving the architectural and design trade
For showrooms and design studios, we can prepare a curated sample box with three or four neutral colors in the same profile, so clients can compare tones side by side under their own lighting. We can also keep an approved color on file so that later phases or additional properties can be matched to the same specification without repeating the sampling process.
We can also prepare a one-page specification sheet listing the chosen color, profile, gap setting, and clip type for your drawing set, so that contractors and installers work from the same details the designer approved, and later reorders repeat the same specification without ambiguity.
Certification & Quality Control
Because a minimalist finish shows every inconsistency, quality control for this line concentrates on color evenness, straight edges, and consistent board width, in addition to the usual environmental and material compliance documents.
| Certification / Test | Availability |
| REACH / RoHS compliance | Standard formulation compliant |
| FSC Chain of Custody (fiber source) | Available on request |
| Third-party lab reports | UV/weathering, slip resistance, and water absorption reports available (SGS/BV/Intertek) |
| Factory quality system | ISO 9001 factory management system |
Our QC process checks color against an approved reference sample at the start and during each production run, measures board straightness and width tolerance, and inspects the face for streaks or shade shifts that would be obvious on a wide, plain surface. We recommend ordering a whole terrace from a single production batch, and we are happy to arrange a third-party pre-shipment inspection focused on color consistency for larger projects.
Where a project specifies a very particular tone, we can hold an approved sample at our factory and compare each batch against it directly. This gives your project a documented visual benchmark, which is especially useful when several phases are ordered months apart.
For buyers who want extra assurance, we can send a short set of production photos showing boards laid side by side from the actual batch, including the edge and end faces, before the order is packed. If a board from the finished order is later found to deviate visibly from the approved reference, please send us a photo and the batch label on the carton, and we will investigate against our production records and resolve verified defects promptly.
Production Capacity & Lead Time
Minimalist decking is made on our capped composite lines, so capacity and lead time follow that line, with extra time allowed when a new custom color or an unusual board width is requested.
| Item | Detail |
| Monthly capacity | Follows our capped composite line capacity, scheduled alongside other capped-surface orders |
| Sample lead time | 5-8 working days for existing colors and profiles |
| Standard order lead time | 20-30 days after deposit and color confirmation |
| Custom color or width lead time | Additional 25-35 days for color development or new tooling |
| Approval note | Allow time for a physical color sample to be reviewed on site before production is released |
We provide production progress updates and can share photos of finished boards under daylight before your order is packed. For a style where the exact tone matters so much, we strongly recommend approving a physical sample instead of a screen image, and building that step into your project schedule from the beginning.
If your construction schedule is fixed, please tell us your installation date when you request a quotation. That allows us to work back from the date and tell you honestly whether a custom color is realistic, rather than promising a timeline we cannot meet.
Where a project has both a fixed handover date and a custom color, the safest approach is to approve the color sample first and then confirm the order, so that production is released against an agreed reference. We will confirm the shipping calendar in writing once the production slot is booked, and we flag any change to it as soon as we know, not at the last minute.
Logistics & After-Sales Support
Because the surface of a minimalist deck is meant to look flawless, we take extra care in how these boards are packed and how issues are handled after delivery.
- Shipping ports - orders typically go out via Ningbo or Shanghai port; FOB, CIF, or DDP quoting available
- Surface protection - protective interleaving between boards, plus pallet strapping and corner protectors, to prevent scuffing of the matte face during handling
- Documentation - commercial invoice, packing list, bill of lading, and certificate of origin provided as standard; fumigation and inspection certificates on request
- Damage/shortage claims - please photograph any surface damage at unloading and before installation; verified manufacturing defects are resolved through replacement stock or credit on the next order
- Installation guidance - manuals covering hidden clip spacing, gap width, and expansion allowance, so the lines stay straight across the whole deck
We suggest keeping a small reserve of boards from your production batch after installation. A single replacement board from a much later batch can sometimes show a slight tone difference on a plain, wide surface, whereas a board from the original batch will match closely.
For larger terraces, we can number the pallets so that the installing crew can lay boards in a planned sequence, spreading any very slight natural variation evenly across the deck rather than concentrating it in one area. Our export team stays reachable by phone or WhatsApp through shipping and unloading, and can help your installer with clip spacing or gap questions during the first days on site.
Frequently Asked Questions
Q: What makes a deck look "minimalist" rather than just plain?
A: Mostly the details: wide boards, tight and even gaps, square edges, hidden fasteners, and a calm neutral color. A plain board with visible screws and uneven gaps will look ordinary, while the same board installed carefully can look very refined.
Q: Which colors are most popular for this style?
A: Warm grey, graphite, sand, and stone tones are the most requested. We can send a small sample set so you can compare them under your own lighting before deciding.
Q: Do you recommend an embossed wood grain for a minimalist look?
A: Usually a matte or very lightly brushed surface suits the style better, since a strong grain adds visual texture. If you want a subtle hint of grain, we can suggest the softest option in our range.
Q: Can the stairs and edges match the deck exactly?
A: Yes. We can supply fascia, stair nosing, and edge trim in the same color and finish so the deck edge and steps look like one continuous surface.
Q: How do I avoid visible joints on a large terrace?
A: Ordering longer board lengths and planning the joist layout so joints fall in a deliberate pattern helps a lot, and we can review your deck plan to suggest a layout before production begins.
Q: Can I see a real board before ordering?
A: Yes, we recommend it for this style. A physical board viewed on your own site in real daylight tells you far more about tone and finish than a screen image, and sample sets are available on request.
