中文简体
English
Material & Specification Overview
The table below summarizes features that influence surface temperature. Actual temperatures depend on sun angle, air temperature, wind, and installation, so please treat any figures as indicative and confirm with a sample test on site.
| Item | Detail |
| Recommended Structure | Co-extrusion capped composite, solid or hollow core |
| Color Strategy | Lighter and warm mid-tones generally run cooler than dark colors |
| Reflective Pigment Options | Solar-reflective pigment options for selected colors, reducing heat absorption compared with standard pigments of a similar shade |
| Substructure Ventilation | Open, ventilated frame recommended to let heat escape from below the boards |
| Standard Thickness Range | 20mm - 30mm |
| Standard Width Range | 135mm - 200mm |
| Temperature Data | Comparative surface temperature measurements available for selected colors, with test conditions stated |
Product Photography
We provide installed photos from hot regions, and where available, images from surface temperature comparisons between colors. Numbers alone can mislead, so we also state the conditions of each measurement, such as air temperature, sun exposure, and time of day.
A note on comparisons: surface temperature readings differ widely with conditions. A fair comparison uses the same time, same sun, and same sensor, and we can explain how to run a simple side-by-side test on site with sample boards.
We can also share our suggested joist spacing and ventilation gap for hot climates, since a deck that can breathe underneath runs cooler and dries faster after rain, and this often makes a bigger difference than the choice of board color alone.
We can also explain how texture affects the feel of a hot board, since a finer, matte surface often feels less harsh underfoot than a glossy one.
Minimum Order Quantity & Pricing Structure
Pricing follows the underlying capped profile, with reflective pigment options and lighter colors priced according to specification. MOQ for a first trial order is typically 1 x 20ft container, and we can combine several colors in one container so that buyers can compare them in real sun before choosing a main color.
| Order Volume | Pricing Tier |
| Sample boards | Sample fee + courier, often credited toward the first order |
| 1 x 20ft container | Standard FOB pricing |
| 1 x 40ft HQ container | Discounted per-sqm pricing |
| Resort and hospitality volumes | Negotiated pricing with phased delivery across construction stages |
Quotations are typically given as FOB Ningbo or Shanghai, with CIF and DDP available once the destination and Incoterm are confirmed. Standard payment terms are 30% deposit by T/T with the balance against the B/L copy. Reflective pigment options may add a modest premium, and we will state it clearly in the quotation so that it is not a surprise later.
For budgets that are tight, one practical approach is to use the cooler, more expensive option only in barefoot areas, such as pool edges and children's zones, and a standard profile in areas where people wear shoes.
We can also prepare a quotation that compares a standard color and a reflective pigment version of a similar shade, so that the extra cost of the cooler option can be judged against the comfort benefit for your customer.
We can also provide a quotation for a small trial area first, so that you can confirm comfort levels in the real setting before committing to a full order of a more expensive option.
OEM & Customization Options
Customization for heat comfort mostly involves choosing color and finish with the local climate and the users' habits in mind.
- Color selection - lighter and warm mid-tones for barefoot areas, with samples so that they can be tested in real sun
- Reflective pigment options - for selected colors, to reduce heat absorption while keeping a richer tone
- Surface texture - finer textures and matte finishes can feel more comfortable underfoot than deep, glossy ones in strong light
- Zoned specification - different profiles for barefoot and shoe-wearing areas in the same project, matched in color family
- Test kits - sample boards of several colors packed for a side-by-side sun test on your own site
For hotels and resorts, we can help prepare a zoning plan that separates areas by how likely people are to be barefoot, such as pool edges, spa decks, and beach paths, so that heat comfort is prioritized where it matters and cost is controlled elsewhere. We can also suggest shade elements or planting to reduce direct sun on the hottest areas.
We can also produce a side-by-side sample panel of two or three colors mounted together, which makes it easy for a customer to touch each one after it has been left in the sun and choose by feel, which is more convincing than any chart.
For resorts and hotels, we can suggest a palette of two or three coordinated tones, using cooler, lighter tones in barefoot zones and richer tones elsewhere, so that the whole property still looks unified even though different zones use different products.
Certification & Quality Control
For heat-related claims, the most valuable evidence is clearly documented comparative testing, together with honesty about how conditions affect results.
| Certification / Test | Availability |
| Comparative surface temperature data | Available for selected colors, with conditions stated |
| UV/weathering reports | Available per profile (SGS/BV/Intertek) |
| REACH / RoHS compliance | Standard formulation compliant |
| Factory quality system | ISO 9001 factory management system |
Our QC process checks pigment consistency, since reflective performance depends on the pigment being used in the right amount and dispersion. We measure color against approved references and check cap coverage. For buyers who need independent numbers, we can arrange a comparative test at a recognized laboratory, although this requires time and cost, and results are specific to the test conditions.
We do not claim a fixed number of degrees of cooling in general, because the result depends on the environment. We state the conditions behind each measurement, so that the numbers can be interpreted fairly.
Batch records let us trace any shipped order to its production run, which is useful if a customer later compares the deck with a sample and wants to confirm that the same pigment formulation was used. We keep an approved sample for a reasonable period.
If your customer requires independent temperature data, please tell us the test method and conditions they accept. We will compare them with the data we hold and say plainly whether it fits. Where it does not, we can discuss commissioning a new comparison, explaining the time and cost, and being clear that the result will apply to the tested conditions and not to every climate.
Production Capacity & Lead Time
Heat-comfort profiles are produced on our capped composite lines, and lead time depends on whether an existing color is chosen or a custom reflective color is developed.
| Item | Detail |
| Monthly capacity | Follows our capped composite line capacity |
| Sample lead time | 5-8 working days for existing colors |
| Standard order lead time | 20-30 days after deposit and specification confirmation |
| Custom reflective color lead time | Additional 25-35 days for development and testing |
| Sun-test note | We suggest allowing a few weeks for on-site sample testing before the main order is confirmed |
We provide production progress updates and can share photos of finished boards before packing. If your project opens in a hot season, please share the date at the start, so that we can work back from it and tell you the latest order date that allows for production and transit.
A sun test with samples costs little compared with replacing a deck that customers find too hot, so we encourage building this step into the schedule from the beginning.
If your project must open before a hot season, please share the date at the start. We will tell you honestly whether a custom reflective color is realistic in that time, or whether an existing color is the safer choice.
If your customer is deciding between colors, we suggest sending samples early and running the sun test before the order is placed. We will confirm the production schedule in writing after the color choice is final, and tell you promptly if anything changes, so that a late color change does not delay the whole project.
Logistics & After-Sales Support
Boards for hot regions should arrive in good condition after long transit, and buyers benefit from clear guidance about how to install and use the deck in hot conditions.
- Shipping ports - orders typically go out via Ningbo or Shanghai port; FOB, CIF, or DDP quoting available
- Packing - strapped pallets, moisture-resistant wrapping, and corner protectors for long transit in hot, humid conditions
- Documentation - commercial invoice, packing list, bill of lading, certificate of origin, and relevant test reports provided as standard
- Damage/shortage claims - please photograph any damage at unloading; verified defects are resolved through replacement stock or credit on the next order
- Installation guidance - advice on ventilated substructure, expansion gaps in high heat, and shade options
We also share simple guidance for users, such as wetting the deck lightly to cool it before children walk on it, and using rugs or shade sails in the hottest hours. These small measures are often more effective than any material change, and they set realistic expectations.
Our team stays reachable by phone or WhatsApp through shipping and unloading, and can help your installer with expansion gaps and ventilation details, which matter more in high heat than in mild climates.
Please tell us about the storage conditions at the site, since boards left in direct summer sun while still wrapped can warm unevenly and mark. We recommend storing them flat, supported, and shaded. If a pallet arrives damaged, take photos before unpacking and send them with the carton labels, so that we can arrange a replacement for verified cases.
Frequently Asked Questions
Q: Will the boards be cool enough to walk on barefoot in full sun?
A: Any deck can become hot in strong summer sun. Lighter colors and reflective pigments help, but they do not eliminate heat, and we recommend testing samples in your own sun conditions.
Q: Which colors run coolest?
A: Lighter and warm mid-tones generally stay cooler than dark colors. We can share comparative measurements with the test conditions stated.
Q: Does ventilation under the deck matter?
A: Yes. An open, ventilated substructure carries heat away from below the boards, while an enclosed base can trap heat and make the surface hotter.
Q: How does composite compare with timber for heat?
A: Dense composite can feel hotter than some timbers of similar color, especially dark colors in full sun. This is why color and ventilation choices matter more with composite.
Q: Can you guarantee a specific surface temperature?
A: No, since temperature depends on weather and site. We provide comparative data and honest guidance, and we suggest an on-site sample test for confidence.
Q: Can I run my own sun test before ordering?
A: Yes, we recommend it. Place samples of several colors side by side in the same sun for the same time, and compare them by touch and, if you can, with a surface thermometer.
Q: Do lighter colors show dirt more?
A: They can show some marks more than mid-tones, but they run cooler. Warm mid-tones are often a good balance, and we can send samples so that you can judge by eye and by touch.
